Aprilia RS660 (2025+)
Aprilia RS660 (2025+) - Carbon Fiber Front Fairing
Carbon fiber front fairing for the 2025+ Aprilia RS660, built around the redesigned front end. Direct OEM replacement - bolts straight onto the bike using the original mounting points, with no modifications required.
This is the upper fairing that frames the headlight: the piece every rider sees first, and the one that defines the front of the bike. Replacing the OEM plastic with carbon drops 150 grams from the very top of the chassis while increasing structural rigidity and impact strength - a noticeable upgrade for street riders who want the carbon look done right, and for track builds where every gram matters.
Built from the Best Materials, Finished by Hand
1x1 Plain or 2x2 twill carbon fiber with a high gloss or matte clearcoat. Only premium-grade materials are used the same carbon, resin and finishing standards we apply across every RBM part. Custom finishes are available on request for riders building a specific aesthetic; reach out through our contact page to discuss options.
Direct OEM Replacement - No Modifications
Engineered around the OEM mounting points on the 2025+ RS660 chassis. Every bolt hole, clip location and fastener pattern matches the factory fairing, so installation is a direct swap using the original hardware. No drilling, no adapters, no trimming.
Specifications
- Fitment: Aprilia RS660 - 2025 onwards (post-redesign front end)
- Material: 1x1 Plain or 2x2 twill carbon fiber
- Finish: Gloss clearcoat
- Weight saving: 150 g lighter than OEM
- Structural: Greater rigidity and impact strength vs. OEM plastic
- Mounting: Direct OEM replacement - uses factory mounting points
- Includes: Front fairing only (no hardware - reuse OEM bolts)
- Custom finishes: Available on request
Why the Front Fairing Matters
The upper fairing is the most visible carbon part you can fit to an RS660. It sits in the rider's eyeline every time they walk up to the bike, and it's the panel that catches the light at every angle in photos. Combined with the weight savings high on the chassis and the structural step up over flexible plastic, it's the single highest-impact carbon upgrade on the 2025+ platform.
Limited-run production. Browse the full RS660 collection or contact RBM for custom finish requests and engineering inquiries.
or write to info@rbmworks.com
On backorder
Estimated dispatch in 2–4 weeks
Key Elements
Genuine carbon fiber
Real carbon fiber construction — light, rigid and finished to a standard you can see up close. No printed or wrapped imitation.
Direct fit
Developed on the exact model it is made for, following the factory lines and mounting points of your bike.
Home installation
Fit it yourself with basic tools using our step-by-step installation guides. No specialist equipment or mechanical experience required.
Rider support
A direct line to the people who make the parts — we reply within 24 hours on weekdays.
Carbon fiber front fairing for the 2025+ Aprilia RS660, built around the redesigned front end. Direct OEM replacement - bolts straight onto the bike using the original mounting points, with no modifications required.
This is the upper fairing that frames the headlight: the piece every rider sees first, and the one that defines the front of the bike. Replacing the OEM plastic with carbon drops 150 grams from the very top of the chassis while increasing structural rigidity and impact strength - a noticeable upgrade for street riders who want the carbon look done right, and for track builds where every gram matters.
Built from the Best Materials, Finished by Hand
1x1 Plain or 2x2 twill carbon fiber with a high gloss or matte clearcoat. Only premium-grade materials are used the same carbon, resin and finishing standards we apply across every RBM part. Custom finishes are available on request for riders building a specific aesthetic; reach out through our contact page to discuss options.
Direct OEM Replacement - No Modifications
Engineered around the OEM mounting points on the 2025+ RS660 chassis. Every bolt hole, clip location and fastener pattern matches the factory fairing, so installation is a direct swap using the original hardware. No drilling, no adapters, no trimming.
Specifications
- Fitment: Aprilia RS660 - 2025 onwards (post-redesign front end)
- Material: 1x1 Plain or 2x2 twill carbon fiber
- Finish: Gloss clearcoat
- Weight saving: 150 g lighter than OEM
- Structural: Greater rigidity and impact strength vs. OEM plastic
- Mounting: Direct OEM replacement - uses factory mounting points
- Includes: Front fairing only (no hardware - reuse OEM bolts)
- Custom finishes: Available on request
Why the Front Fairing Matters
The upper fairing is the most visible carbon part you can fit to an RS660. It sits in the rider's eyeline every time they walk up to the bike, and it's the panel that catches the light at every angle in photos. Combined with the weight savings high on the chassis and the structural step up over flexible plastic, it's the single highest-impact carbon upgrade on the 2025+ platform.
Limited-run production. Browse the full RS660 collection or contact RBM for custom finish requests and engineering inquiries.
Key Elements
Genuine carbon fiber
Real carbon fiber construction — light, rigid and finished to a standard you can see up close. No printed or wrapped imitation.
Direct fit
Developed on the exact model it is made for, following the factory lines and mounting points of your bike.
Home installation
Fit it yourself with basic tools using our step-by-step installation guides. No specialist equipment or mechanical experience required.
Rider support
A direct line to the people who make the parts — we reply within 24 hours on weekdays.
Fitment
Every RBM Works part is developed and test-fitted on the exact models listed under "Fits on" above — if your bike is listed, it fits, guaranteed, or return shipping is on us.
Don't see your model or year listed? Write to info@rbmworks.com before ordering and we will confirm whether it fits.
Materials
Genuine carbon fiber — not printed or wrapped imitation. Every part is hand-finished and inspected before it leaves the workshop.
Shipping & Returns
This item is made to order and ships on backorder — please allow 2–8 weeks for dispatch.
Once shipped, delivery typically takes 3–7 days within the EU and 5–10 days internationally.
Changed your mind? Return unused parts within 14 days of delivery for a full refund — write to info@rbmworks.com with your order number to start the process.
Client Service
Questions about fitment, installation or an existing order? Write to info@rbmworks.com — we reply within 24 hours on weekdays.
FAQ
Answers on shipping, returns, fitment and installation — read the most common questions on our FAQ page.
Aprilia RS660 (2025+)
Front Fairing
